Holemaking
Showing 42201–42250 of 47158 results
-
-
-
-
-
YG-1 20 mm Dia. 140 Carbide TiCN 3XD, 5XD, 7XD Drill Insert Coolant Thru
20.00MM I-DREAMDRILL Insert INOX TICN-COATED #E
-
YG-1 12.6 mm Dia. 140 Carbide TiAlN 8XD Coolant Thru Drill
12.60MM CARBIDE DREAM DRILL INOX W/ COOLANT (8XD)
-
YG-1 0.2244 Dia. 135 Cobalt TiN Straight Shank Jobber Non-Coolant Thru Drill
5.7 HSS-Co5% JOBBERS LENGTH STRAIGHT SHANK GOLD-P DRILLS
-
Ingersoll 0.4528 Dia. Bright BTA Brazed Adapter Coolant Thru
0.453 BTA Brazed Adapter|Single tube cross hole adapter|.437-2.559″ (11.1-65.0 mm)|
-
Ingersoll 0.748 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.748 (19.00 mm) Square Insert Indexable Metric Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Iscar 0.2559 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.256″ Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)
-
HAM 12.6 mm Dia. 140 TA-C Coolant Thru Drill
12.60 mm 5XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
-
-
-
-
-
-
Iscar 0.6142 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.614″ Double Margin Drilling Heads for DCN Drills for Machining Cast Iron with High Surface Finish Results
-
-
-
HAM 0.45 mm Dia. 140 TA Non-Coolant Thru Drill
0.45 mm Solid Carbide Twist Drill, 2 Flutes, TA Coated, Non-Coolant
-
-
-
YG-1 0.7500 Dia. 118 HSS Oxide Morse Taper Shank Non-Coolant Thru Drill
3/4 HSS(M2) MORSE TAPER SHANK TWIST DRILLS
-
-
YG-1 3.8 mm Dia. 140 Carbide TiAlN 5XD Non-Coolant Thru Drill
3.80MM CARBIDE DREAM DRILL (5XD) – METRIC
-
-
Iscar 0.9527 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.953″ Double Margin Drilling Heads for DCN Drills for Machining Cast Iron with High Surface Finish Results
-
YG-1 3.26 mm Dia. 140 Carbide TiAlN 6XD Non-Coolant Thru Drill
3.26MM CARBIDE DREAM DRILL FOR HIGH HARDENED MATERIAL (HRc50 ~ HRc70) TIALN COATED
-
HAM 12.4 mm Dia. 137 TA-C Coolant Thru Drill
12.40 mm 40XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
Iscar 0.5906 Dia. Tube Coolant Thru Drill
0.591″ Deep Single Tube Drills with Internal Single Start Thread and a Brazed Tip (.571-2.559 dia.)
-
Iscar 2.6378 Dia. Tube Drill System Coolant Thru
2.638-2.874″ Double-Tube Drill System with 4 Start Thread Connection Outer Tubes
-
-
-
-
-
-
HAM 5.4 mm Dia. 120 TA Non-Coolant Thru Drill
5.40 mm Solid Carbide Twist Drill, 2 Flute, TA Coated, Non-Coolant
-
HAM 7 mm Dia. 137 TA-C Coolant Thru Drill
7.00 mm 40XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
-
-
Iscar 0.7087 Dia. STEEL 2XD Indexable Sqaure Insert Coolant Thru Drill
0.709″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
-
-
Iscar 0.6063 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.606″ Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)
-
-
